Features and Benefits:
* Pre-shrunk for faster installation: typically 1 minute * Increases battery life of splicing oven * More splices per hour due to reduced installation time * Instant shrink-force drives adhesive liner into all areas - excluding all air * Single opening for fiber provides greater assembly accuracy and repeatability * No mispositioned pins - already fully encapsulated * Adhesive liner bonds to fiber, providing vibration damping and environmental sealing     Sleeve series available: * 1A/2A - Larger Sleeves * 3A - Standard Sleeves * 3D - Standard Sleeve/Non Metallic Pin * 6A Mini/Micro Sleeves * Ribbon - Mass Fusion Sleeves
FinishAdapt fusion splice protector sleeves are designed and manufactured to meet - and in most cases exceed - all the leading world standards for splice protectors, including Bellcore and British Telecom. All the material specifications are set and strictly monitored by FinishAdapt, based on 10 years of research and development and following extensive and ongoing field trials. The component parts are manufactured exclusively for FinishAdapt to their own rigorous specifications. The splice protectors consist of an outer heatshrinkable sleeve, an inner meltable adhesive liner and a wire or ceramic stiffener, depending on type. In addition to the standard range, FinishAdapt produces non-standard 'Specials' to suit individual customer requirements and applications. For downloadable details of all Fusion Splice Protector Sleeves click here